N.B. On OS X the shortcuts use cmd instead of Ctrl and option instead of alt
| Grouped by function | |
|---|---|
| Keys | Function |
| F1 | Show Help |
| F2 | Show Help on Selected Item |
| Ctrl+M | Measure Response |
| Ctrl+N | Show Info Panel |
| Ctrl+S | Save Measurement |
| Ctrl+O | Open Measurement File |
| Ctrl+Shift+S | Save All Measurements |
| Ctrl+Alt+S | Save Filters |
| Ctrl+Alt+O | Open Filter file |
| Ctrl+I | Import Measured Data |
| Ctrl+Alt+I | Import Impedance Measurement |
| Ctrl+Shift+I | Import Impulse Response |
| Ctrl+Shift+U | Import Audio Data |
| Ctrl+Shift+N | Import Sweep Recording |
| Ctrl+Backspace | Delete Current Measurement |
| Ctrl+Shift+Backspace | Delete All Measurements |
| Ctrl+Shift+K | Show Room Simulator |
| Ctrl+Shift+L | Show Level Meters |
| Ctrl+Shift+M | Show SPL Meter |
| Ctrl+Shift+O | Show SPL Logger |
| Ctrl+Shift+P | Show TS Parameters window |
| Ctrl+Shift+Q | Show EQ panel |
| Ctrl+Shift+R | Show Signal generator |
| Ctrl+Shift+T | Show RTA |
| Ctrl+Shift+V | Show Overlays Window |
| Ctrl+Shift+W | Show IR Windows panel |
| Ctrl+Shift+E | Show Preferences |
| Ctrl+F | Retrieve Filter Settings from Unit |
| Ctrl+Shift+F | Send Filter Settings to Unit |
| Ctrl+Delete | Reset Filters for Current Measurement |
| Ctrl+LEFT | Select previous graph group |
| Ctrl+RIGHT | Select next graph group |
| Ctrl+1 | Select first graph group |
| Ctrl+2 | Select second graph group |
| Ctrl+3 | Select third graph group |
| Ctrl+4 | Select fourth graph group |
| Ctrl+5 | Select fifth graph group |
| Ctrl+6 | Select sixth graph group |
| Ctrl+7 | Select seventh graph group |
| Ctrl+8 | Select eighth graph group |
| Ctrl+9 | Select ninth graph group |
| Ctrl+Shift+G | Show Grid |
| Ctrl+Shift+A | Frequency Axis Log/Linear |
| Ctrl+Z | Undo Zoom |
| Ctrl+Shift+1 | Apply 1/1 octave smoothing |
| Ctrl+Shift+2 | Apply 1/2 octave smoothing |
| Ctrl+Shift+3 | Apply 1/3 octave smoothing |
| Ctrl+Shift+6 | Apply 1/6 octave smoothing |
| Ctrl+Shift+7 | Apply 1/12 octave smoothing |
| Ctrl+Shift+8 | Apply 1/24 octave smoothing |
| Ctrl+Shift+9 | Apply 1/28 octave smoothing |
| Ctrl+Shift+X | Apply variable smoothing |
| Ctrl+Shift+Y | Apply psychoacoustic smoothing |
| Ctrl+Shift+Z | Apply ERB smoothing |
| Ctrl+Shift+0 | Remove smoothing (see note below) |
| Ctrl+Shift+J | Save Graph As JPEG |
| LEFT, RIGHT, UP, DOWN | Move graph cursor |
| Shift + LEFT, RIGHT, UP, DOWN | Move graph |
| x | Zoom out horizontally |
| Shift+x | Zoom in horizontally |
| y | Zoom out vertically |
| Shift+y | Zoom in vertically |
| Alt+1 | Select measurement 1 |
| Alt+2 | Select measurement 2 |
| Alt+3 | Select measurement 3 |
| Alt+4 | Select measurement 4 |
| Alt+5 | Select measurement 5 |
| Alt+6 | Select measurement 6 |
| Alt+7 | Select measurement 7 |
| Alt+8 | Select measurement 8 |
| Alt+9 | Select measurement 9 |
| Alt+UP | Select previous measurement |
| Alt+DOWN | Select next measurement |
| Alt+A | Average the responses in All SPL graph |
| Alt+B | Save both in RTA window |
| Alt+D | Toggle Distortion button in RTA window |
| Alt+G | Generate Decay or Waterfall plots |
| Alt+N | Open stepped sine dialog in RTA window |
| Alt+P | Save peak in RTA window |
| Alt+R | Reset Averaging in RTA window |
| Alt+S | Save current in RTA window |
| Alt+Z | Set t=0 at cursor in Impulse graph |
N.B. On OS X the shortcuts use cmd instead of Ctrl and option instead of alt
| Listed in key order | |
|---|---|
| Keys | Function |
| Alt+1 | Select measurement 1 |
| Alt+2 | Select measurement 2 |
| Alt+3 | Select measurement 3 |
| Alt+4 | Select measurement 4 |
| Alt+5 | Select measurement 5 |
| Alt+6 | Select measurement 6 |
| Alt+7 | Select measurement 7 |
| Alt+8 | Select measurement 8 |
| Alt+9 | Select measurement 9 |
| Alt+UP | Select previous measurement |
| Alt+DOWN | Select next measurement |
| Alt+A | Average the responses in All SPL graph |
| Alt+B | Save both in RTA window |
| Alt+D | Toggle Distortion button in RTA window |
| Alt+G | Generate Decay or Waterfall plots |
| Alt+N | Open stepped sine dialog in RTA window |
| Alt+P | Save peak in RTA window |
| Alt+R | Reset Averaging in RTA window |
| Alt+S | Save current in RTA window |
| Alt+Z | Set t=0 at cursor in Impulse graph |
| Ctrl+LEFT | Select previous graph group |
| Ctrl+RIGHT | Select next graph group |
| Ctrl+1 | Select first graph group |
| Ctrl+2 | Select second graph group |
| Ctrl+3 | Select third graph group |
| Ctrl+4 | Select fourth graph group |
| Ctrl+5 | Select fifth graph group |
| Ctrl+6 | Select sixth graph group |
| Ctrl+7 | Select seventh graph group |
| Ctrl+8 | Select eighth graph group |
| Ctrl+9 | Select ninth graph group |
| Ctrl+F | Retrieve Filter Settings from Unit |
| Ctrl+I | Import Measured Data |
| Ctrl+M | Measure Response |
| Ctrl+N | Show Info Panel |
| Ctrl+O | Open Measurement |
| Ctrl+S | Save Measurement |
| Ctrl+Z | Undo Zoom |
| Ctrl+Alt+I | Import Impedance Measurement |
| Ctrl+Alt+O | Open Filter file |
| Ctrl+Alt+S | Save Filters |
| Ctrl+Backspace | Delete Current Measurement |
| Ctrl+Delete | Reset Filters for Current Measurement |
| Ctrl+Shift+0 | Remove smoothing (see note below) |
| Ctrl+Shift+1 | Apply 1/1 octave smoothing |
| Ctrl+Shift+2 | Apply 1/2 octave smoothing |
| Ctrl+Shift+3 | Apply 1/3 octave smoothing |
| Ctrl+Shift+6 | Apply 1/6 octave smoothing |
| Ctrl+Shift+7 | Apply 1/12 octave smoothing |
| Ctrl+Shift+8 | Apply 1/24 octave smoothing |
| Ctrl+Shift+9 | Apply 1/28 octave smoothing |
| Ctrl+Shift+A | Frequency Axis Log/Linear |
| Ctrl+Shift+E | Show Preferences |
| Ctrl+Shift+F | Send Filter Settings to Unit |
| Ctrl+Shift+G | Show Grid |
| Ctrl+Shift+I | Import .pcm Impulse Response |
| Ctrl+Shift+J | Save Graph As JPEG |
| Ctrl+Shift+K | Show Room Simulator |
| Ctrl+Shift+L | Show Level Meters |
| Ctrl+Shift+M | Show SPL Meter |
| Ctrl+Shift+N | Import Sweep Recording |
| Ctrl+Shift+O | Show SPL Logger |
| Ctrl+Shift+P | Show TS Parameters window |
| Ctrl+Shift+Q | Show EQ panel |
| Ctrl+Shift+R | Show Signal generator |
| Ctrl+Shift+S | Save All Measurements |
| Ctrl+Shift+T | Show RTA |
| Ctrl+Shift+U | Import Audio Data |
| Ctrl+Shift+V | Show Overlays Window |
| Ctrl+Shift+W | Show IR Windows panel |
| Ctrl+Shift+X | Apply variable smoothing |
| Ctrl+Shift+Y | Apply psychoacoustic smoothing |
| Ctrl+Shift+Z | Apply ERB smoothing |
| Ctrl+Shift+Backspace | Delete All Measurements |
| LEFT, RIGHT, UP, DOWN | Move graph cursor |
| Shift + LEFT, RIGHT, UP, DOWN | Move graph |
| x | Zoom out horizontally |
| Shift+x | Zoom in horizontally |
| y | Zoom out vertically |
| Shift+y | Zoom in vertically |
Note that in windows Vista and Windows 7 the Ctrl+Shift+0 shortcut is by default assigned to switching the input language, see http://support.microsoft.com/kb/967893. To remove smoothing either use the graph menu entry, or the smoothing box in the graph controls, or press the smoothing shortcut again - for example, pressing Ctrl+Shift+3 will smooth the data to 1/3 octave, pressing it again will remove the smoothing.
On Vista and Windows 7 the key assignment can be removed by following these steps: Click Start, and then click Control Panel. Double-click Region and Language. Click Keyboards and Languages, and then click Change keyboards. Click Advanced Key Settings, and select Between input languages and click change Key Sequence. For Switch Input Language and for Switch Keyboard Layout, select Not Assigned. Click OK and then Apply, then click OK.
On Windows 8 the route is Control Panel -> Language -> Advanced Settings -> change language bar hot keys. On the Advanced Key Settings tab select the Between input languages action then click Change Key Sequence then in the Switch Keyboard Layout column of the dialog that pops up select 'Not Assigned'. Click Apply then OK.